Cadence 6 Install

My somewhat messed up understanding of installing Cadence 6.1.5 & TSM 65nm

---

cds.lib

DEFINE tsmcN65 /afs/eecs.umich.edu/kits/TSMC/CMN65GP/2011.02rf/rf1p9m6x1z1u_oa/tsmcN65

Notice that there is an "_oa" which stands for open access.

My whole cds.lib file looks like this (special thanks to Muhammad Faisal who actually created most of it).

SOFTINCLUDE /usr/caen/ius-8.2/tools/affirma_ams/etc/connect_lib/cds.lib
DEFINE cdsDefTechLib $CDS/tools/dfII/etc/cdsDefTechLib
DEFINE basic $CDS/tools/dfII/etc/cdslib/basic
DEFINE analogLib $CDS/tools/dfII/etc/cdslib/artist/analogLib
DEFINE tsmcN65 /afs/eecs.umich.edu/kits/TSMC/CMN65GP/2011.02rf/rf1p9m6x1z1u_oa/tsmcN65
DEFINE avTech /net/nasr1/home/tools/cadence/Assura/AV316USR1_HF4/lnx86//tools/assura/etc/avtech/avTech
DEFINE tsmcSymbol /dsdhome/pdk/TsmcSymbol/tsmcSymbol
#DEFINE avTech /usr/caen/assura-3.1.5/tools/assura/etc/avtech/avTech
DEFINE ahdlLib $CDS/tools/dfII/samples/artist/ahdlLib
DEFINE functional $CDS/tools/dfII/etc/cdslib/artist/functional

---

.cshrc_tsmc65nm

If you can do "modules" then you do the following (works only on 'manistee' currently):

    
setenv EDITOR "gedit"
setenv SPECTRE_DEFAULTS "-E"
setenv CDK_DIR /afs/eecs.umich.edu/kits/TSMC/CMN65GP/2011.02rf/rf1p9m6x1z1u_oa/
setenv CDS_Netlisting_Mode "Analog"
module load cadence-ic/6.1.5
module load mmsim/11.10.487
module load calibre/2012.2_17
module load incisiv/11.10.061
module load bda/2011_q3

---

Otherwise, you are SOL... but you can try this (but I don't think that ADL will work for you...)

setenv SW_IC 6.1.5 
setenv CDS /usr/caen/ic-6.1.5
setenv CDSHOME /usr/caen/ic-6.1.5
setenv CDS_INSTALL_DIR /usr/caen/ic-6.1.5/tools/dfII
setenv CDS_Netlisting_Mode     Analog
setenv XLIB_SKIP_ARGB_VISUALS  1
setenv DD_DONT_DO_OS_LOCKS     SET
setenv CLS_CDSD_COMPATIBILITY_LOCKING  NO
setenv CDK_DIR /afs/eecs.umich.edu/kits/TSMC/CMN65GP/2011.02rf/rf1p9m6x1z1u_oa/
setenv EDITOR "gedit"
set path=(/usr/caen/ic-6.1.5/tools/bin:/usr/caen/ic-6.1.5/tools/dfII/bin:/usr/caen/ic-6.1.5/tools/leapfrog/bin $path)

setenv SW_CALIBRE 2012.2_17
setenv ENABLE_XRC_ENGINE 77AaBD43

My complete .cshrc_tsmc65nm is attached (I think, assuming I know how to do this correctly). Cshrc tsmc65nm

Credit: Muhammad Faisal & Jeffrey Fredenburg

--Mike 15:52, 15 May 2013 (EDT)